The ViaTerra M200 Rain Pants are designed to keep you dry during monsoon rides. Designed to be worn over the riding pants with longer YKK® Aquaguard® WP zippers give enough room to put the rain pants on or take off. Lightweight, compact and can be stored in a separate pouch!
PU laminated breathable polyester fabric rated for 5000mm water column pressure
YKK® Aquaguard® zipper
Weight ~250 gms
Features:
Built to layer
Designed to be worn over the riding pants with enough room to put the rain pants on or take it off easily.
Ripstop construction
The M200 Rain Pants is built with ripstop laminated fabric—making it tougher, more durable, and ready for rough use. The fabric is rated for 5000 mm water column pressure while letting heat escape!
YKK® Aquaguard® zipper
Genuine YKK® zippers for a water-resistant closure you can trust—ride after ride. Longer zipper pullers make it easy to use even with gloves on.
Gripper Elastic
The M200 Rain Pant comes with Gripper Elastic at the waist and bottom hems for better grip while in use.
Pre-curved leg
Pre-curved legs for a snugger fit over motorcycle pants keeping in mind the riding posture.
Knee-length rear opening
Long leg zippers on the M200 Rain Pants let you gear up or down without taking off your boots.
Slider garage
Slider garages help keep dirt out, protecting the zipper from grime and wear.
Reflectives for night visibility
Reflectives on thigh and calf for increased visibility in low light conditions.
Things to Remember:
1. Try to avoid accumulation of water on the rain wear (within folds on the rainwear or at the crotch area on the motorcycle seat), as this might result in ingress of water over time. Smoothening the zipper flaps to avoid folds helps. To avoid accumulation of water on the motorcycle seat (at the crotch area) during continuous rain, standing up intermittently helps.
2. You might experience moisture on the inner part of the rainwear caused by condensation due to the temperature differential between the outside atmosphere and your body heat. This is similar to what you can see on a glass of cold water, which develops water beads on the outside. Being a natural phenomenon the same is unavoidable. However this would not be to an extent where you would be completely wet.
Care and Storage:
CLEAN & CARE:
For dirt and stains, wipe clean with a damp cloth and lukewarm water (DO NOT USE HOT WATER).
DO NOT allow your rainwear to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
Do not place your rainwear near, or come in contact with, a direct heat source.
Dry the rainwear on a hanger away from direct sunlight where there is good ventilation.
Zippers need to be cleaned and lubricated regularly – you can use Vaseline or candle wax.
STORAGE:
Make sure your rainwear is completely dry before you store it on a hanger.
If stored wet or in a non-ventilated area, mildew may grow on the fabric, causing discoloration and damage.